To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Most roll-up covers can’t offer the strength of a hard shell, but this one does. The Revolver X2 combines rustproof, 1/4" thick aluminum slats with a tough, textured black vinyl top. The aluminum gives it structure and security, while the vinyl adds flexibility and a smooth, finished look. It can even support up to 400 lbs of evenly distributed weight when rolled out. That means your cargo stays protected under a solid, weather-resistant surface that still looks sleek and low-profile.
When you’re hauling tall or oversized gear, you don’t have to take the cover off. Just pull the release cable and roll it up toward the cab. The heavy-duty nylon straps and plastic buckles hold it securely in place so you can drive without the cover rubbing against the cab. Because it mounts inside the bed rails, you still have access to stake pockets and tie-down points for extra gear or accessories.
Security comes built in. The Revolver X2 uses side rails with locking teeth that run the full length of the bed. When you press down on the rear slat at the tailgate, those teeth rotate into place to secure every slat along both sides. Once the tailgate is closed and locked, the whole cover is locked too—no Velcro or snaps to fuss with, just solid metal engagement from front to back.
This cover sits nearly flush with the bed rails for a clean appearance that blends in with the truck’s lines. A matte black finish with rubber seals helps keep out water, dust, and debris while resisting UV damage over time. The combination of aluminum rails and rubber gaskets keeps leaks to a minimum so your cargo stays dry through wet weather and car washes alike.
You can install it yourself with basic tools thanks to the no-drill design that uses existing mounting holes from the OEM track system. The aluminum rails clamp securely in place using those factory holes, so setup is simple and precise. Once mounted, you’re ready to load up and hit the road with reliable coverage that works as hard as your truck does.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Randy: Hey guys, it's Randy here at etrailer.com again. Today we're taking a look at the Back Industries Revolver X2. This is a, as you can see, a hard style tonneau cover that gives us that classic smooth look. It has flush rails so it doesn't stick up off the side of the vehicle very much. Overall, it offers a lot of security and a lot of protection, which is generally what we're looking for out of an tonneau cover.Either we have sensitive items in there, we don't want them getting wet, we don't want them getting dirty, so we wanna protect them. Or we have expensive items in there.
We could have tools, stiff wheels, things like that. And when using this cover with the locking tailgate, it's one of the most secure lids on the market.Now some additional benefits that we have are the look quality with this. You can see it's a nice, flush design, it doesn't really stick up over our bed rails very high. It's just gonna give us that clean, sleek look but offers a lot of protection. Also as a side effect, we're not gonna have that wind bucketing into the bed of the truck.
That can help reduce wind noise, it can help reduce wind drag. That'll kind of lead us into better fuel economy.Now when in the stored position, something I really like are the straps. These are designed to come around, they clamp in right down here to the rail. And essentially when rolled up, that's gonna keep this from moving forward or back. It's a nice handy feature so we don't have to worry about contact up here, or maybe it heading back towards the bed of the truck.Also if this we're to roll up too far, which in most cases, it actually can't make contact with the truck, we do have some pads here.
Those will make sure that as it makes contact, we don't have any scarring on the cover or on the vehicle. Here you can see the front side of those straps where they come in, just nice, easy to use clips. Squeeze it to remove and press it in to attach it.Now when we compare the Revolver X2 to other tonneau covers that we have available, I like the solid design. We're getting a huge upgrade, having a nice solid panel where nobody can get in or at least cut through something that's very thin and gain access to the bed. But I also like the other advantage it has, and that's at where it stores.
It's gonna store right up on here on top of the bed, so our bed is left completely unobstructed.There are other roll up style tonneau covers that just slide in and out on the track and those are gonna have a box that sticks down in the bed for it to roll up in. In that situation, you're losing some of your bed capacity, so that's definitely something to keep in mind. Other type covers that offer the same style of protection or give us a hard surface will be like a tri folder or a quad fold style cover.You're gonna fold the panel over onto itself, onto itself and then eventually, up against the back of the vehicle. Now basically when you fold that last panel up, it's pretty much gonna obstruct the view out of your rear window. With the roll up cover here and the way it sits, generally it's not gonna be any higher than our headrest on that back seat. So really, we're not gonna lost that much field of view out of that back window.Now another thing that we can appreciate about this cover is that this installs relatively easy on your pickup truck and it requires zero modifications. It's gonna work with beds that are painted just like this one. Spray in bed liners or drop in bed liners. Although on a drop in bedlinen, you might have to make a few cuts here and there to allow our clamps. You can see we're gonna have on short bed applications, six of these. Long bed applications are gonna have eight of these.Those are designed to grab the rail of our cover and our bed rail to keep everything nice and secure. Now, the security aspect we hit on a little bit earlier, what makes it such a nice, secure cover. Not only those really thick, quarter inch aluminum slats, but each of those slats has a locking tab on the end of it. You can see as we roll that up, each one of those tabs is gonna have that black piece that comes off the end.And when we close our cover, you see how that aluminum rail here That goes in and then engages that tab. So what that means, comparing this to a folding style cover, is that we have 100% lock coverage all the way down the side, rather than just having our clips at each of our little intersections. And now also to the protect the outer surface or the surface we're gonna look at when our cover's rolled up. You can see the entire length has been covered with a nice felt. That's gonna help to decrease the possibly of our aluminum transferring over onto our vinyl cover.Another feature I appreciate that we don't always see with other tonneau covers, is that even with it closed, we're still able to close that tailgate so we don't have to open it, close the tailgate and then close it on top. Also with locking tailgates being very, very popular, we've got the solid security of our cover. Once we lock this tailgate, it's gonna make it very hard for somebody to access that bed.Here you can see the latching mechanism. It's gonna be the same on both sides. We've got a release handle right here. You'll notice as we pull that down, it engages that lever. That's the lever that brings in the locks all the way down. And we just simply push it down until we hear the click on both sides. We're ready to shut our tailgate at that point and hit the road.Now when it comes time to release your cover, it can be done from either side. We have a release handle here, and then on the same spot here on the driver's side we're gonna pull that. And then it's just a one person job. We don't have to have one person on each side trying to get everything rolled up properly.It's also an all weather material, so regardless of if you're in a colder climate or a hot climate, you're not gonna have any problem getting this rolled up and then rolled back out. Unlike some of the other covers, when it got cold outside, they we're near impossible to use.So as you can see, there are a lot of benefits to the Revolver X2, but there are tons of tonneau covers out there on the market. I think this one's strengths are increased visibility in the back of the truck so we can see what's behind us and also really maximizes the security that we have in our truck bed.
Ratings & Reviews
I put this tonneau on my Tacoma--it was easy to install, and then easy to remove when I put a camper on several months later.
Installed well. Would help if one had a second person. I am 65 and still installed on my own. Excellent fit. Very happy with unit.
Will be traveling country and needed to have some security and yet need to be able to have large items in bed of truck at times. No need to take a cap off and all the hassles that go with that.
Love how its flush with the bed and ease to roll in and out on one side. Does not derail or misalign through bumps or long distance drive. does not obstruct heavy loads and adds a protectant to the back glass. Have not test the effect on MPG as MPG is not a factor in trucks. Heck I even put holes in my gas tank [roll eyes]
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jay J.
6/22/2022
the felt is falling off like everyone mentions. still good, no bowing since I put recommended load ontop.